Elite Nano-Ceramic Coating Package

What is the difference with the regular nano-ceramic package?

The regular package primarily protects the vehicle's paintwork.

The Elite package extends this protection to the main outdoor surfaces:

• painting and bodywork;
• windshield;
• side windows;
• rear window;
• exterior mirrors;
• unpainted moldings and plastics;
• accessible outer faces of the rims;
• tires.

It is aimed at owners who are looking for a more complete finish and consistent protection across the entire vehicle.

Paint protection

The nano-ceramic coating applied to the bodywork forms a semi-permanent layer bonded to the paint.

It helps in particular to:

• seal the finish against oxidation;
• increase resistance to UV rays;
• reduce the risk of micro-scratches during maintenance;
• facilitate the removal of contaminants;
• enhance the brightness and depth of reflections;
• It is easier to maintain a clean appearance.

However, the coating does not make the paint scratch-proof and does not protect against stone chips, impacts, or deep damage.

Protection of glass surfaces

The window treatment creates a more hydrophobic surface that helps water run off more quickly when the vehicle is in motion.

The treatment increases visibility when it rains or snows.

This protective layer can also make cleaning easier:

• insects;
• traces of rain;
• road contaminants;
• light dirt;
• of certain mineral deposits removed quickly;
• snow and ice

The treatment is applied to the windshield, windows, rear window and compatible exterior mirrors.

It does not replace windshield wipers and does not make glass impossible to stain or scratch.

Protection of exterior moldings and plastics

Unpainted plastics are exposed to sunlight, weathering, salt, and washing products.

Appropriate protection helps to:

• preserve a darker, more uniform appearance;
• slow down the bleaching caused by UV rays;
• reduce the adhesion of contaminants;
• facilitate routine maintenance;
• limit the dull or faded effect.

The result depends on the initial condition of the material. A protective coating cannot repair a molding that is cracked, deeply discolored, or already damaged.

Rim protection

The accessible outer faces of the rims receive a protective coating that helps reduce friction:

• brake dust;
• salt;
• road dirt;
• washing residues;
• metallic contaminants.

Wheels generally become easier to clean when maintenance is performed regularly.

Important limit

The treatment is applied only to accessible surfaces, without removing the wheels.

The inner barrels are not included, as their processing would require the removal of the wheels and the use of suitable professional lifting equipment.

Tire protection

A durable protective coating is applied to the sidewalls of the tires to achieve a clean, dark, and uniform appearance.

Unlike some very oily polishes, the goal is not to create an excessively glossy finish, but rather a natural and well-maintained appearance.

The main advantage of tire coating is its durability. Unlike traditional tire products that last one to three weeks on your tires, this coating has an average lifespan of one year.

The duration of the result varies depending on:

• mileage;
• the rain;
• washing;
• the products used;
• exposure to salt and road contaminants.

The hydrophobic effect may diminish without the protection disappearing.

Water beading is one of the most visible attributes of a coating, but it does not represent all the protection on its own.

Over time, contaminants, washing residues, salt, and mineral deposits can reduce the hydrophobic effect.

This does not necessarily mean that the coating has disappeared.

On the paint, the protective layer can continue to:

• limit oxidation;
• increase resistance to UV rays;
• reduce the risk of micro-scratches;
• facilitate maintenance;

even when the water beads less strongly.

Proper decontamination or maintenance can sometimes revive some of its properties.

Why don't we promise a specific number of years?

The lifespans advertised by manufacturers do not always take into account the actual conditions of use.

A vehicle parked indoors, used sparingly and carefully washed will not age like a vehicle parked outdoors, used daily and cleaned with aggressive methods.

Duration and performance are influenced by:

• the frequency of washing;
• the products used;
• mileage;
• the climate;
• exposure to the sun;
• winter salt;
• indoor or outdoor parking;
• periodic maintenance.

We therefore prefer to present these protections as semi-permanent, rather than promising a fixed duration that is impossible to guarantee for all vehicles.

Polishing is recommended, but remains optional.

Polishing helps to improve the paintwork before the coating is applied.

In particular, it can:

• increase the shine;
• reduce micro-scratches;
• remove slight oxidation;
• correct certain washing marks;
• to produce a more uniform aesthetic result.

However, it remains optional.

Some homeowners already consider their paintwork to be in satisfactory condition and primarily want to protect it. We will not require you to pay for a level of correction you do not deem necessary.

The coating will protect the paintwork in its current state, without masking any existing defects.

Thorough preparation before application

The quality of the result depends heavily on the preparation of the different surfaces.

The package may include, in particular:

• Thorough exterior wash;
• wheel and tire cleaning;
• chemical decontamination of ferrous particles;
• removal of tar and accessible contaminants;
• mechanical decontamination when necessary;
• window cleaning;
• preparation of the moldings;
• disposal of old products;
• final preparation of the paint;
• Optional polishing;
• application of protective measures adapted to each surface.

Our process

1. Complete inspection

We examine the paintwork, windows, moldings, rims and tires to identify their condition and any possible limitations.

2. Washing and decontamination

The various surfaces are thoroughly cleaned to remove contaminants that could impair the adhesion of the protective coverings.

3. Optional polishing

When chosen, polishing is carried out before applying the coating to the paint.

4. Final preparation

The remaining oils, product residues and contaminants are removed.

5. Surface application

Each protective layer is methodically applied to compatible materials, then leveled and inspected.

6. Curing and final inspection

The vehicle must undergo an initial curing period before being exposed to water or washed. Specific instructions will be provided after the service.

Protection that requires time and precision

The Elite package requires several hours of preparation, as each surface must be cleaned, decontaminated, and prepared separately before application. Paint, glass, moldings, rims, and tires do not all react in the same way; therefore, each material receives a tailored treatment.

This preparation is just as important as the coating itself. A poorly cleaned or contaminated surface can reduce adhesion and compromise the uniformity of the result. That's why we prioritize a methodical approach over a quick application.

At the end of the service, the entire vehicle has a more consistent finish and is easier to maintain. The Elite package is therefore ideal for owners who want comprehensive protection and who value attention to detail, both on the bodywork and other exterior surfaces.

What the Elite package cannot do

Even with complete protection, the vehicle is not invulnerable.

The Elite package cannot:

• prevent stone chips;
• stop deep scratches;
• protect against collisions;
• repair existing defects;
• replace a paint protection film;
• completely prevent water stains;
• protect inaccessible areas of the rims;
• eliminate the need for maintenance;
• compensate for aggressive washing methods.

It offers superior protection, but it's not an indestructible shield.

Who is the Elite package for?

This package is particularly suitable for:

• to new or recent vehicles;
• to high-end vehicles;
• for owners who wish to keep their vehicle for a long time;
• to vehicles regularly parked outside;
• for enthusiasts who are looking for a complete finish;
• for owners who want to simplify the maintenance of all surfaces;
• to vehicles that have received a paint correction.

Complete exterior protection, tailored to your vehicle

The Elite package offers a consistent approach to protecting paintwork, windows, moldings, rims and tires.

Each surface is treated according to its needs, with realistic expectations and no promise of infinite protection.

Make an appointment to give your entire vehicle complete, careful protection tailored to your way of using it.